Raspberry Pi Compute Modul 4/5, 2.4G/5G WiFi/BT Antenna - &q

About This Product

FREQUENCY RANGE: 2400-2500/5150-5850 MHz; RADIATION: Omnidirectional 2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input Onboard power monitoring chip for real-time measurement of voltage, current and power Onboard SIM card slot for NANO-SIM card Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation Designed for Raspberry Pi 5, HAT+ standard Onboard PCIe interface for directly connecting to Raspberry Pi 5 via 16PIN cable More USB Capability For Raspberry Pi 5 Extends The PCIe Interface To 3x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals Compatible With Multiple SIMCom/Quectel 4G/5G modules with M. About this item The Raspberry Pi Compute Module 4 Antenna Kit has undergone extensive compliance testing and meets the standards required in many countries. This Antenna Kit is certified for use with Raspberry Pi Compute Module 4. If a different antenna is used, then separate certification will be required, and this must be arranged by the end-product design engineer. Frequency range 2 5G Standard 3GPP R15 3GPP R16 - 5G Sub-6 GHz Sub-6G & mmWave Sub-6 GHz - Applicable Region Global (except China) Global except Americas Americas Global Dimensions 30.0 × 52.0 × 2.3 (mm) 30.0 × 42.0 × 2.3 (mm) 42.0 × 31.4 × 3.8 (mm) Frequency band 5G 5G NR - n257, n258, n260, n261 n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n79 n2, n5, n7, n12, n13, n14, n25, n30, n41, n48, n66, n71, n77, n78, n79 - 5G NR NSA n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 5G NR SA n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 LTE LTE-FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 B2, B4, B5, B7, B12, B13, B14, B25, B26, B29, B30, B66, B71 B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD B34, B38, B39, B40, B41, B42, B43, B48 B38, B39, B40, B41, B42, B43 B41, B46, B48 B34, B38, B39, B40, B41 LAA B46 - UMTS WCDMA B1, B2, B3, B4, B5, B6, B8, B19 B1, B2, B4, B5, B8, B19 B1, B5, B8 B2, B4, B5 B1, B2, B4, B5, B6, B8, B19 GNSS GPS / GLONASS / BeiDou (Compass) / Galileo / QZSS (QZSS is not supported on RM502Q-AE) GPS / GLONASS / BeiDou / Galileo / QZSS Data rate 5G mmWave - downlink 4 Gbps;uplink 1.4 Gbps - 5G SA Sub-6 downlink 4.2 Gbps;uplink 450 Mbps downlink 2.4 Gbps;uplink 900 Mbps downlink 2.4 Gbps;uplink 500 Mbps - 5G NSA Sub-6 downlink 5 Gbps;uplink 650 Mbps downlink 3.4 Gbps;uplink 550 Mbps LTE downlink 2 Gbps;uplink 200 Mbps downlink 1.6 Gbps;uplink 200 Mbps downlink 1.0 Gbps;uplink 200 Mbps downlink 150 Mbps;uplink 50 Mbps UMTS downlink 42 Mbps;uplink 5.76 Mbps Note: The 4G/5G module is NOT included, please purchase separately. Raspberry Pi Compute Module 4, 4GB RAM - Raspberry Pi Raspberry Pi OS OpenWRT Ubuntu Comes with 5G-4IN1-PCB Antenna Supports top and bottom mounting, easy to install, good communication effect Install on the Bottom Install on the Top * for reference only, please refer to the Package Content for detailed part list Onboard power monitoring chip and EEPROM for real-time monitoring voltage, current and power of module Via I2Csupports saving HAT+ ID and product information, compatible with HAT+ standard The Waveshare ORD-CM4 Antenna is designed for Raspberry Pi Compute Module 4 & 5 with wireless connectivity. It provides stable signal reception and improved performance for Wi-Fi and Bluetooth applications 5g External Antenna Raspberry Pi Compute Modul 4/5, 2.4G/5G WiFi/BT Antenna - &q Raspberry Pi Cm5 2, SIM82XX and RM5XX series Modules, Compatible with 3042/3052 Packages 5G Module RM502Q-AE RM520N-GL RM530N-GL SIM8262E-M2 SIM8262A-M2 SIM7600G-H-M. BANDWIDTH: 100–700 MHz; CONNECTOR: SMA male central pin VSWR: ≤1.92; POLARISATION: Vertical PEAK GAIN: 2±0.5 dBi; Antenna DIMENSIONS: 109 × 10 mm OUTPUT IMPEDANCE: 50 Ω; MAXIMUM POWER: 10 W